Your PS5 fan is running loud, the console feels hot, or it has been 1–2 years since it was last cleaned. Dust accumulates inside over time, reducing airflow and causing the fan to work harder — leading to overheating and noise.
Your PS5 fan is running loud, the console feels hot, or it has been 1–2 years since it was last cleaned. Dust accumulates inside over time, reducing airflow and causing the fan to work harder — leading to overheating and noise.
Our PS5 deep clean service includes complete disassembly, thorough dust removal from every internal surface, and Liquid Metal thermal paste replacement on the main CPU. This is the same service Sony performs when PS5s are returned for overheating complaints — and it permanently solves the issue.
Every component is removed — outer shell, fan, heatsink, disc drive and motherboard — for thorough access.
Compressed air and specialist brushes used to clean every surface including fan blades, heatsink fins and vent channels.
Original Liquid Metal thermal compound removed from the CPU and replaced with fresh Liquid Metal paste applied precisely.
Fan bearings inspected, blades cleaned individually, and all vents cleared of debris.
PS5 reassembled, powered on and run under load to confirm temperatures and fan noise are normal before return.
While your PS5 is in, we can check everything else too.
Sony recommends cleaning the PS5 every 12–24 months depending on use and environment. If you notice louder fan noise or more heat, it is time for a clean regardless of when the last one was done.
PS5 deep clean with Liquid Metal re-paste is $99 at Tech Stop in Balzac (limited time). Located at New Horizon Mall — minutes from Airdrie and easily accessible from Calgary.
Sony uses Liquid Metal thermal compound on the PS5 CPU — a high-performance material that degrades over time. Replacing it restores full thermal conductivity and is essential for a proper deep clean.
Basic outer dust removal is possible yourself. But proper deep cleaning — including heatsink removal and Liquid Metal re-paste — requires disassembly and technical experience. Improper Liquid Metal application can short the board.
Walk in to Tech Stop at New Horizon Mall, Balzac — no appointment needed. Free diagnosis, 30-day warranty.